How to Install and Use Genius G540 USB Programmer on Windows 8
If you are looking for a low-cost and powerful USB programmer that can program over 6500 chips, you might want to consider the Genius G540 USB Programmer. This programmer is compatible with Universal Bios, PAL/GAL, EPROM, 51 AVR, PIC, MCU, and SPI (24/25/93) series chips. It also supports Windows 7, 8, 8.1, and 10 operating systems. In this article, we will show you how to install and use the Genius G540 USB Programmer on Windows 8.
Step 1: Download the Genius G540 Programmer Software and Driver
The first step is to download the Genius G540 Programmer Software and Driver from the official website or from a trusted source. You can find the download links at the end of this article. The software file is a zip file that contains the setup.exe file and some other files. The driver file is a rar file that contains the driver files for different versions of Windows.
Step 2: Install the Genius G540 Programmer Software
The next step is to install the Genius G540 Programmer Software on your computer. To do this, follow these steps:
Extract the zip file to a folder on your computer.
Run the setup.exe file as administrator.
Follow the instructions on the screen to complete the installation.
Restart your computer if prompted.
Step 3: Install the Genius G540 Programmer Driver
The third step is to install the Genius G540 Programmer Driver on your computer. To do this, follow these steps:
Extract the rar file to a folder on your computer.
Connect the Genius G540 USB Programmer to your computer via a USB cable.
Open Device Manager on your computer.
Find the device named \"USB Serial Port\" under \"Ports (COM & LPT)\" category.
Right-click on it and select \"Update Driver Software\".
Select \"Browse my computer for driver software\".
Select \"Let me pick from a list of device drivers on my computer\".
Select \"Have Disk\".
Browse to the folder where you extracted the driver files and select the file named \"CH341SER.INF\".
Click \"OK\" and then \"Next\".
Wait for the driver installation to finish.
Step 4: Use the Genius G540 USB Programmer
The final step is to use the Genius G540 USB Programmer to program your chips. To do this, follow these steps:
Open the Genius G540 Programmer Software on your computer.
Select the chip type that you want to program from the drop-down menu.
Select the COM port that corresponds to your programmer from the drop-down menu.
Click \"Connect\" to establish communication with your programmer.
Click \"Read\" to read data from your chip or \"Write\" to write data to your chip.
You can also use other functions such as \"Verify\", \"Blank Check\", \"Erase\", etc. according to your needs.
Congratulations! You have successfully installed and used the Genius G540 USB Programmer on Windows 8. If you have any questions or problems, please refer to the user manual or contact the customer service of Genius. You can also watch this video tutorial for more guidance: [^1^].
Genius G540 Programmer Software Download (Latest Version 2023)